1. Fully automatic NYQT10-15 cement brick, intelligent PLC control, using the latest WEINVIEW LCD touch screen andIndustrial PC can be upgraded at any time, the Japanese the Omron silver contacts contactor Schneider Electric durable. The non-contact switch step-by-step interlock safety adjustable.
2. Products can be a large number of various waste ash, slag, sand, slag, fly ash, wind fossils, gangue, ceramic, perlite and other processed into a variety of new environmentally friendly wall materials, such as hollow brick, brick, the standard bricks without sintering brick hardness and bending degrees can be detected by the quality inspectiondepartment to exceed the standards set by the state.
3 full hydraulic drive, using the stepless hydraulic FM technology the vibration frequency 4500-5400r/min automatically adjust all Japan Yuken hydraulic products for trouble-free operation of the hydraulic system to provide protection. Escalation model and optimize the design, more precision mechanical components, lower loss. Unique force mutualpendulum feeding, even 10mm thick brick wall can be rapid and uniform fabrics, the intensity of the product is very small error.
4. New products, technology updates, higher yields. Perfect after-sales service to solve your plant layout, installation, commissioning, has been to produce quality products, as well as the production of bricks management, corporate image planning.
Technical parameters
Overall Dimensions (MM) of the molding machine 3000 × 2500 × 2200 (mm)
Pallet Size (MM) 1050 × 700 × 20mm (plastic plate)
Machine weight (T) 108000kg
Vibration table and mold vibration
Vibration frequency 60HZ
Molding cycle 15s
Installed capacity of 60kw
NYQT10 -15 yield table
Product specifications per plate block / blocks / block of 8 hours / 300 days (two classes)
Block brick 390 × 190 × 190 10 2400 1920 0 11.52 million
Porous brick 240 × 115 × 90 20 4800 3840 0 23.04 million
Standard brick 240 × 115 × 53 40 9600 7680 0 46.08 million
| QT10-15B Automatic Block Making Machine |
| |
| |
| Each Mould |
Brick |
48Pcs/Mould |
Power |
44.2KW |
| 240x115x53mm |
| Paving Block |
27Pcs/Mould |
Weight |
17.3T |
| 200x100x60mm |
| Hollow Block |
24Pcs/Mould |
Dimension |
5400× 2050× 3050mm |
| 240x115x90mm |
| Hollow Block |
10Pcs/Mould |
Pallet Size |
1100× 960× 30mm |
| 390x190x190mm |
| Moulding Cycle |
16-25Seconds/cycle |
Vibration Mode |
Board Vibration |
| Vibration Force |
90KN |
Standard |
JC/T920-2003 |
| Good Reasons to choose QT10-15 |
| High |
Brick |
|
48Pcs/Mould |
(8hours)76800-80000Pcs |
| Production |
240x115x53mm |
| |
|
|
| |
Hollow Block |
|
24Pcs/Mould |
(8hours)31000-43000Pcs |
| |
240x115x90mm |
| |
|
|
| |
Hollow Block |
|
10Pcs/Mould |
(8hours)12600-16000Pcs |
| |
390x190x190mm |
| |
|
|
| |
Paving Block |
|
27Pcs/Mould |
(8hours) 31000-38000pcs |
| |
200x100x60mm |
| |
|
|
| |
Notes: Production depends on raw materials, block specification , mould design and efficiency of user. |
| Good Design: |
| A, The balance system adopts four-pole guarding way with extended bush to ensure the exact movement of mould. Gear and shaft balance system can make male and female mould move stably. |
| B. The way of feeding is revolving, convective and compulsive to ensure block density and reduce feeding cycle. Gear driving mode of feeding is more steady. Feeder moving is two curved arms drived by two cylinders, which makes feeder move quickly, durablly, and steadly. |
| C. Stacker is controled by frequency conversion to adjust speed. The movement of stacker is flexible and steady. |
| Hydraulic System: |
| The hydraulic system adopts proportion direction valve. The valve can adjust flow rate and buffer cylinder. Therefore, it can protect cylinder and extend life, and make operation steadily and quickly. |
| Vibration System: |
| The vibration adopts frequency conversion technique. The assembly is oil immersed vibration. This improve high speed loading and makes concrete liquefied and air-outed. The five advantages is vibration assembly synchronization, soft starter, densify block, electric saving and quick moulding. |
| High Automatic level: |
| Using Japanese Omron sensor as signal source and Germany Siements PLC as central processing unit to make oil system, air system, electric system and machanical system to be one part. The plant can work automatically and cyclically. Our technicians put fault diagnosis, problem alarming into computor by safty logic control. The screen will show fault and methods to client if there is some problems. |
| Steady& Safe System: |
| It adopts separation of high and low voltage electricity, low voltage controls high voltage technique. This will solve problem of high voltage interfere and ensure gaining of exact signal. It is safe for people and machine. |
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}